Opening amps???

[flyin j]

I want to do human grade test E this cycle but Im unsure of how safe it is to open and draw from amps and by that i mean,

Getting little pieces of glass in the needle,
drawing to much air with my juice,
and possibly shooting thowe tiny unseen shards of glass in me.

Anyone have any input as to what to do or am I worrying about the wrong things here, how easy or hard is it to deal with amps????

 

[Mr.X]

If you score it right, you'll be able to break off the amp without a problem.

use this:
http://www.androusa.com/Amp_opener.htm

 

[AhMadKooL]

I want to do human grade test E this cycle but Im unsure of how safe it is to open and draw from amps and by that i mean,

Getting little pieces of glass in the needle,
drawing to much air with my juice,
and possibly shooting thowe tiny unseen shards of glass in me.

Anyone have any input as to what to do or am I worrying about the wrong things here, how easy or hard is it to deal with amps????

Try sawing the place where you're going to break off the amp. this way when you break it it's a clean break

As for glass getting into the needle the needle is too thin for it to pull any glass so you shouldn't worry about that.

 

[drrman]

I want to do human grade test E this cycle but Im unsure of how safe it is to open and draw from amps and by that i mean,

Getting little pieces of glass in the needle,
drawing to much air with my juice,
and possibly shooting thowe tiny unseen shards of glass in me.

Anyone have any input as to what to do or am I worrying about the wrong things here, how easy or hard is it to deal with amps????

you are BEING WAY TOO OVERCAUTIOUS.....the glass will not shard into the oil, the needle is small enough it would most likely not draw up glass if it did, no need at all to worry about air bubbles bro, you simply turn the syringe needle up before injecting, tap it a few times, air will rise to the top and push it out.....just score it with a file, snap off the top and pull it out of there

 

[al420]

you could also get some injectable b-12, or something like that and practice a little - but the glass in the syringe is not possible unless your using a gauge big enough to build a house w/.

 

[flyin j]

Thanks guys, I do feel like im being overcautious but Ive never had any experience with them or personally known anyone with any.

Thanks Mr.X for that link I will most likely go with that.

Thanks for all of the quick input guys.

 

[flyin j]

Also have any of you ever gotten an empty vial and opened all of the amps then loaded the oil into the empty vial??? Just a quick thought I had.

 

[AhMadKooL]

Also have any of you ever gotten an empty vial and opened all of the amps then loaded the oil into the empty vial??? Just a quick thought I had.

Whats the use of doing that? Just use the same needle to withdraw all the juice from the different vials and then change the needle head since it would be dulled then.

 

[mkazzbmf]

The only caution I think you may wanna take seriously is that when you draw the juice from the amp.....try not to rest the tip of the needle on the glass in the bottom of the amp.....the slightest pressure on the tip can bend the tip down a bit......you wont notice it until you shove the needle in....and its even worse when you pull it out....if the very tip gets bent even the slightest amount it makes a mini scoop at the tip and the shot will hurt like a motherfucker...I swear thats the reason why so many people bitch about sust and primo hurting....Its them shoving the tip to hard to get every last drop.


Kaz

 

[drrman]

The only caution I think you may wanna take seriously is that when you draw the juice from the amp.....try not to rest the tip of the needle on the glass in the bottom of the amp.....the slightest pressure on the tip can bend the tip down a bit......you wont notice it until you shove the needle in....and its even worse when you pull it out....if the very tip gets bent even the slightest amount it makes a mini scoop at the tip and the shot will hurt like a motherfucker...I swear thats the reason why so many people bitch about sust and primo hurting....Its them shoving the tip to hard to get every last drop.


Kaz

this is EXACTLY why you DO NOT shoot with the same needle you draw with!!! get you some 18g needles to draw with or use one off one of your syringes over and over a few times...just re cap it and seal it in something.

 

[cranny]

this is EXACTLY why you DO NOT shoot with the same needle you draw with!!! get you some 18g needles to draw with or use one off one of your syringes over and over a few times...just re cap it and seal it in something.

Agree, darts are about .20 ea. Draw w/ one and shoot w/ another.

 

[TracDT1]

just wrap a little toilet paper around the top and gently break it off while not putting to much pressure on the top of the amp...and even if u accidentally crush the top part of the amp into a million pieces u will have to tp to collect it all safely...try that bro shouldnt have any problem

 

[ItalianMuscle27]

you are BEING WAY TOO OVERCAUTIOUS.....the glass will not shard into the oil, the needle is small enough it would most likely not draw up glass if it did, no need at all to worry about air bubbles bro, you simply turn the syringe needle up before injecting, tap it a few times, air will rise to the top and push it out.....just score it with a file, snap off the top and pull it out of there

Same thing I was going to say...

 

[yoop33]

Also have any of you ever gotten an empty vial and opened all of the amps then loaded the oil into the empty vial??? Just a quick thought I had.

This is not a good idea for mutiple reasons.
1 it will take way to much time to get the oil out
2 you will never get all the oil out
3 you will be waisting your money by never getting all the oil out

 

[mkazzbmf]

This is not a good idea for mutiple reasons.
1 it will take way to much time to get the oil out
2 you will never get all the oil out
3 you will be waisting your money by never getting all the oil out

Not to mention that you are taking a chance of infection.....bad idea.


Kaz

 

[digimon7068]

If you score it right, you'll be able to break off the amp without a problem.

use this:
http://www.androusa.com/Amp_opener.htm

What he said, plus, turn the syringe upside down and suck in a little extra air after you draw to empty the pin plus give you some space to tap the air bubbles to. I never worry a great deal if there's a couple of tiny stubborn air bubbles stuck on the plunger. I always aspirate after insertion plus, I think it takes approx 4cc of air directly into a vein to put you in the dirt.

 

[ItalianMuscle27]

Also have any of you ever gotten an empty vial and opened all of the amps then loaded the oil into the empty vial??? Just a quick thought I had.

I wont mention his name, but I know someone from Venezuela that practices these unsafe methods..

 

[flyin j]

Not to mention that you are taking a chance of infection.....bad idea.


Kaz

True, I thought about that but i just wanted to see some opinions on doing it.

thanks for all input.

Human grade HERE I COME!!!!!!!!!!!