Please Scroll Down to See Forums Below
napsgear
genezapharmateuticals
domestic-supply
puritysourcelabs
UGL OZ
UGFREAK
napsgeargenezapharmateuticals domestic-supplypuritysourcelabsUGL OZUGFREAK

Is my Test e powder legit? (pics)

Bro, the best you can do is sight test, smell test, and a melting point test. In this case with test e you should have a light pine smell, it should liteally melt in your fingrs at room temp rubbing it together. From there there is not much else you can do but do bloods before the cycle, and a few weeks in. With my test prop I tried to mix it at 200mg/ml and could not get it to hold...as it shouldnt. Try mixing a small amount at about 400mg/ml, adding small amounts of BB as you go. If it wont hold in suspension and crystalizes then you are probably good to go. Test e will normally not hold at that level.

I jst got my blood work back and my stuff is good to go, probably a bit too good. I am a bit embarrassed at how high my total test came back. At least it put my mind to rest!
 
im currently on another brand if test e test was high I switched to mi one two weeks ago do u think if I gt bloods n test is high then its legit ?

Sent from my GT-I9000 using EliteFitness
 
sony190 said:
I can get test e to hold at 400 with the right ba/bb ratio
Click to expand...

Wow, not bad. I am guessing the amount of BB is pretty high. Maybe then he could try 500mg...my idea was not very scientific in nature but I needed to try something to calm my doubts about my powder purity.

My thought process was that it would be difficult to hold at higher than normal concentrations, therefore somewhat verifying the test content????

With powders its a trust factor I guess, but I still was looking for a little proof. I did my bloods and I feel better now.
 
well it has like a.sweet smell n it melted btween mi fingers so thats a plus will switchin gear n gettin bloods sho that the.high test is.from mine 2 weeks being off the otha?

Sent from my GT-I9000 using EliteFitness
 
dvoted said:
well it has like a.sweet smell n it melted btween mi fingers so thats a plus will switchin gear n gettin bloods sho that the.high test is.from mine 2 weeks being off the otha?

I would say take a blood test, run the new stuff for a few weeks then redo the blood. You will have 2 samples to compare.

I usually like to run the first blood test once PCT is complete, also to see how I recovered from the cycle. Plus your 1st blood test is showing natural test, nothing else. In your case you have stopped taking the other test e for 2 weeks and really are jumping right back into a cycle. So if you are looking to seee if the new test e is good, taking one test now and one in a month.

Also factor in the amount you plan to inject and if the lab you use shws results over 1500 ng/dl, if not you may have trouble determining the strength. There are some guidelines and are usually based on the lab showing a max or not.

Ive got some numbers on base test levels based on the amount injected if you are interested...hope that helped some.
Click to expand...
 
thanks heaps so if my test levels come bk higher or higher than my previous test it could still b mi old test? onli until a few more weeks will mi home brew test b checked n ye plz send figures :)

Sent from my GT-I9000 using EliteFitness
 
Here they are.....

As you can see if your lab is limited to a max of 1,500 ng/dl you should probably run 300mg week, which seems really low. Otherewise you will not know how strong the test is. For example if you are running 750mg a week and you get a result of <1500 ng/dl how will you know if it was 1600 or 2500? Thats where some doubt can come in. Also I have read that running an AI while testing can affect the total. I am not sure why but on other boards where they publicize lab testing the rules are to run the test without an AI.

250mg of test a week- T level should be 1100-1600ng/dl
500mg of test a week- T level should be 1800-2500ng/dl
750mg of test a week- levels should be well into the 3000's

According to an official clinical application :

25mg of test a week- T level was 253ng/dl
50mg of test a week- T level was 306ng/dl
125mg of test a week- T level was 542ng/dl
300mg of test a week- T level was 1,345ng/dl
600mg of test a week- lT level was 2,370 ng/dl
 
Well my test levels are very high then mi test level was 277nmol/l which is 1nmol/l = 28 ng/dl, therefore my test level is 7,756 ng/dl wow. .. Im injecting 2mls of test e a week within one shot though, so every monday is one injection (500mg of test e) and when i took the bloods was on a monday 6 hours after injection on the 3rd week

Sent from my GT-P7510 using EliteFitness
 
I dont know a ton about bloodwork, but that seems very high for only 500 mg a week. I am not sure what other factors could affect the blood test. But hey why complain about super hight test, lol!
 
yeah I.am but I changed to homebrew so the effects could b from the other
Sent from my GT-I9000 using EliteFitness
 
I am just curious. Is ur insurace co paying for ur bloods?


Sent from my iPhone using EliteFitness app
 
New to this site, great thread and posts, very impressed. Dvoted, did you ever notice the results of your homebrew? Seems like the thread died before you posted...?
 
Its melting point is near room temperature, so Put it in a plastic bag and run it under hot water in the sink. It should turn to liquid in the plastic bag.
 
You must log in or register to reply here.

Similar threads

hypogaeum
Approved Log UGLOZ Test E, Equipoise, NPP and GH Lean Growth Phase cycle
2 3
Replies
271
Views
23K
the_alcatraz
the_alcatraz
hypogaeum
Approved Log My Testosterone Primobolan HGH and Anavar Recomp Log
2 3
Replies
283
Views
27K
the_alcatraz
the_alcatraz
4
FAKE Pfizer Genotropin Napsgear
Replies
16
Views
2K
jasonhill800
jasonhill800
L
My homebrew
Replies
34
Views
5K
25homes
25homes
H
Need advice. Heart transplant, now struggling with TRT?No energy
Replies
25
Views
4K
25homes
25homes
Top Bottom