Please Scroll Down to See Forums Below
napsgear
genezapharmateuticals
domestic-supply
puritysourcelabs
UGL OZ
UGFREAK
napsgeargenezapharmateuticals domestic-supplypuritysourcelabsUGL OZUGFREAK

Fina conversion with a twist!

  • Thread starter Thread starter ryker77
  • Start date Start date
R

ryker77

Guest
Ok i wanted to combine some prop with fina all in one oil.
I used
two carts of fina 4000mg
46 amps of **'s 50mg/ml prop 2300mg
2.5ml ttokkyo cyp 500mg
A's 4g kit and a 60ml vial

I followed the directions used a glass rod and heat to speed the first stage up. Then I added the prop and cyp. It mixed right in. Filtered it with no problems. Used 5ml of steril oil to flush the filter.
Came out just as clear and clean looking as before.

Cyp was used b/c it was in my goody box. **'s prop amps are kinda overfilled so not sure on total amount of prop between 46-55ml.

Final product:
55ml oil
72mg/ml tren
42-45mg/ml prop
.9mgml cyp



Yummy. Now just gotta stop thinking about it.
 
Thanks bro,,,, But is was just as easy as before. The only hard part was the fear of screwing up and wasting all that gear.
 
Hbone said:
Bro not trying to critisize but you could of done the conversion then mixed it together.
Click to expand...

Duhh. The ideal was to lower the amount of oil to be injected. Every day injections of 2-3ml is alot of oil. I just lowered it to 1ml of oil and can site inject anywhere.
 
I understand. You cut the volume in half . But whats up with the prop. Just throw it in cause you had it. And now you have to take a LARGE amount of tren to get what you need of prop.
 
ED injections of 1ml will give me
504mg of tren per week
300mgs of prop per week

This is plenty of test for me to grow. I only take what I need and 300mgs of test, tren, winny, l-dex is enough. Plus this is for the last 6 weeks of a 12 weeks cycle.
 
question

hi ryker that is a kool idea. very Rico Mctocoish. lol

anyway, bro i'm i assuming correctly that, you did not use the sterile oil that came with the kit except for the 5ml's to flush the filter ?
 
Correct I replaced the sterile oil with the prop and only used the sterile oil to flush the filter.

Gotta say that A' is the man for kits.
 
thanks ryker ! i'm gonna do the same thing.

mega karma's to you bro !
 
Just now have started with the tren in my 12 week cycle. I injected in right bi with an 25x5/8 one ml of oil. The oil was thick but when warmed up it went in OK. The mixture had sat in a box for 6 weeks and the oil is ok.
So far with the EQ and T400 im up 10lbs and plan on adding another 8-10lbs.
 
Ummmm, you put 7300mg into a kit that only yields 4000mg of final product, which means quite a bit of the test was crystallized out. Sorry bro.
 
It's a good thing A's kits contain a shit load of BA. It would be hard to squeeze all that into a ml without.
 
WormAAA77 said:
Ummmm, you put 7300mg into a kit that only yields 4000mg of final product, which means quite a bit of the test was crystallized out. Sorry bro.
Click to expand...


What are you talking about?? Have you not read about T400 which is 400mgs of test in one ml? Or seen the 200mgs test prop?

I emailed A and asked him directly and he said it was fine to replace the sterlie oil with any other type of AS.

Perhaps if I had used a higher amount of test per ml then it may have screwed up. But
 
Interesting...

So, if I take 50ml of phenyl-prop, 100mg/ml and use it in place of oil in A's kit, 4gF with 4g of Finaplix, I will end up with approx. 55ml of:
100mg/ml test and 75mg/ml tren....is it correct?

I wonder, how much will it hurt, to inject?
2cc/day, sound like a good cycle, to me...
 
To be safe email A and ask him. I can only say what has worked for me.
 
Just got a reply from him, he's saying that I should not loose any tren or test with that conversion.
Sound very good!
 
Andy13 said:
It's a good thing A's kits contain a shit load of BA. It would be hard to squeeze all that into a ml without.
Click to expand...

What diff does it make how much BA A's kit contains as long as it's enuff to suspend the tren... If you replace the oil with another roid, wouldn't that other roid bring in its own BA, regardless of how much is in animal's magic?

I'm actually curious about this.

Say 50 ml of 75mg tren require 10ml of BA (example).

The kit contains 39ml of oil, so I'll replace them with 39ml of, say, EQ (200mg/ml). Those 39ml contain, say, 5ml of BA.

So mixing the two would yield 15ml of BA - would MIXING two roids (tren & eq) require proportionately more BA, or are those 15ml enough to suspend it (i.e. is it a linear relationship?).

Thx.
 
Daman, I would think that mixing the two compounds would require a slightly higher amount of BA.
I myself didn't use any extra BA in my mixure and it came out fine.
 
I've made it with prop, and I also made it with enanthate, And both came out fine...
 
ryker77 do you mind if i link this thread to my comprehensive fina link list

to all the guys i didnt ask thanks for not gettin mad
 
ryker77 said:
Just now have started with the tren in my 12 week cycle. I injected in right bi with an 25x5/8 one ml of oil. The oil was thick but when warmed up it went in OK. The mixture had sat in a box for 6 weeks and the oil is ok.
So far with the EQ and T400 im up 10lbs and plan on adding another 8-10lbs.
Click to expand...

A lot of people can site inject 2cc without much of a problem, I know I can. Even in triceps or delts. The fact it is so [] may make it MORE painful, not less. Since the BA/oil ratio is higher now than if they were mixed. And what if you find out that fina gives you gyno ... you are FUCKED cause you just wasted that prop. Its a noble experiment, but not very practical.

NFG
 
acneman said:
ryker77 do you mind if i link this thread to my comprehensive fina link list

to all the guys i didnt ask thanks for not gettin mad
Click to expand...

Sure not a problem.
 
NFG123 said:


A lot of people can site inject 2cc without much of a problem, I know I can. Even in triceps or delts. The fact it is so [] may make it MORE painful, not less. Since the BA/oil ratio is higher now than if they were mixed. And what if you find out that fina gives you gyno ... you are FUCKED cause you just wasted that prop. Its a noble experiment, but not very practical.

NFG
Click to expand...

Ok... I know you can site inject 2cc of oil. But why inject 2cc when you can inject 1cc. The more oil you inject into your body the higher the chance of infection.

THE FACT is that its not anymore painful. I have injected plenty of other brands and my mixture is no more painfull. Perhaps If I had tried a higher ratio of prop then the BA would be to high for comfort.

OK run a search and look for anyone who has gotten gyno from tren!! You'll not find anyone.

The mixture for me seams very usefull. Though next time I will use a better brand of prop. Might even use cyp.
 
Vectork39 said:
so a 4g conversion with just prop, that will take approx 46 amps? i thought i read somewhere that it would only take 22 if but i guess thats for 2g. Am i right?
http://www.elitefitness.com/members/basskiller/profina.html
Click to expand...

That would all depend on the math. If I recall a 4000mgs of tren takes up 4ml of space. Then you need to add in the BA. Next you need to take out 5ml of sterile oit to fluch the filters.
If you wanted tren at 100mgs per ml then the total amount of solution would be 40ml. So that would require around 35ml of prop. But remember you'll loose some tren in the conversion and a very small amount of the prop.
 
You must log in or register to reply here.

Similar threads

1
Successful Homebrews, short Ester @ 200
Replies
9
Views
2K
1Rhino1
1
semper03
Prop and ace
Replies
11
Views
3K
semper03
semper03
J
Component E-H conversion questions
Replies
4
Views
3K
Mh48500
M
J
question on oil for fina conversion
Replies
2
Views
1K
jasper69
J
rjaggers
tren conversion question
Replies
2
Views
987
rjaggers
rjaggers
Top Bottom