Capping own powders - Using ancillaries as filler *READ*

[black sheep]

Capping own powders - Mixing Ancillaries and Multiple orals *READ*

Okay

So I am planning a Primo/Var/Proviron cycle. I was thinking the following:

Since I want to take 20mg of Nolva each day for Colesterol control I was thinking about mixing 40mg of Var, 10mg of Nolva, and 25mg of Proviron in one cap and taking 2 daily, one every 12 hours. I will use corn meal as the filler for the rest of the cap..

This would net me 80mg ED of Var, 50mg ED of Proviron, and 20mg ED of Nolva.

Any thoughts?

 

[badslinky]

Sounds good to me. Im not that prone to gyno so if that is all that you are going to be taking for your cycle you might not want to put the nolvadex in there since it can hinder some gains. That combination will harden you up quite nicely.

 

[moose11]

what size caps r u using? i was JUST going to post about capping powders.

 

[black sheep]

I am using large ones - 00 I believe.

 

[25homes]

Seems like that might be hard to get dosed accuratly....caps are cheap why not cap them seperate?? a little work but then you can play with the doses one by one to get it just were you like..

 

[black sheep]

There is a procedure out there on the net as to how to cap them with a cheap capper, and get the dosage right. It is never going to be 100% accurate, but I am pretty confident my 40mg var/25mg Proviron caps are dosed good.

 

[moose11]

are sales of capping "machines" tracked??

 

[black sheep]

are sales of capping "machines" tracked??

Big expensive automatic ones might be... But not the cheap plastic little at home kits..

 

[xsnrg]

To get the more professional encapsulating models you have to show proof of identification and that information is sent to the U.S.D.E.A. as required under the law.That's if you buy from the USA.....not sure about other countries

 

[Computer]

That is a very good idea. I like that "2 caps a day that do it all" approach.

Some maths, a good scale and any capping machine will do the trick.
Just use the "geometric dilution" technic to obtain an homogene mix.

Don't you think that corn starch will be a little too grainy? Use a filler that has the same texture as your powders.

 

[badslinky]

do you think whey protein would be a good mixer comp?

 

[black sheep]

That is a very good idea. I like that "2 caps a day that do it all" approach.

Some maths, a good scale and any capping machine will do the trick.
Just use the "geometric dilution" technic to obtain an homogene mix.

Don't you think that corn starch will be a little too grainy? Use a filler that has the same texture as your powders.

I actually used Muscle Milk - With it being chocolate, I could tell that thewhite powders were mixed up good, and it had the same texture as my powders. It worked great, and I have been taking the 2 a day for 4 weeks now.

 

[moose11]

I actually used Muscle Milk - With it being chocolate, I could tell that thewhite powders were mixed up good, and it had the same texture as my powders. It worked great, and I have been taking the 2 a day for 4 weeks now.

huh...interesting

 

[gchiild]

Nolvadex is probably not needed since none of these are going to aromatize. Use garlic and other supplements for cholesterol.

 

[1392477]

creatine is a popular filler for home capping as well

 

[ass_face]

Capping Powders is easy.... Just follow these simple steps.

I just made some 25mg Var caps. Here is the process.

The caps were 0 size. I first weighed 60 empty caps. This came to 5 grams. I then filled the caps with my filler, which in this case was creatine. I weighed the caps again... this time they were 34 grams.

34-5 = 29 grams. Per every 60 caps, it is 29 grams of powder. I had five grams of anavar powder to make caps with. Since my machine is a 60 cap machine, I had to base my calculations on 60 caps rather than base 100. 5000mg of powder would make 200 25mg caps.... so I dropped it to 180 caps. Which makes the caps come out to about 27.7mg.

Using this base... I dropped 82 grams of creatine in a jar and added the 5 grams of anavar. Making it 87 grams total (which is 29 * 3 for the math impaired). Very simple really and dosing is really accurate based on my results. It actually came out perfect. No powder left over at all.

Hope this helps.

 

[moose11]

u just put it in a jug and shook it up? that mixed it evenly?

 

[ass_face]

u just put it in a jug and shook it up? that mixed it evenly?

Yeah, did it for about 20 minutes while I was watching tv. You can clearly see the slightly larger crystals evenly dispersed in the creatine.

 

[drrman]

Capping Powders is easy.... Just follow these simple steps.

I just made some 25mg Var caps. Here is the process.

The caps were 0 size. I first weighed 60 empty caps. This came to 5 grams. I then filled the caps with my filler, which in this case was creatine. I weighed the caps again... this time they were 34 grams.

34-5 = 29 grams. Per every 60 caps, it is 29 grams of powder. I had five grams of anavar powder to make caps with. Since my machine is a 60 cap machine, I had to base my calculations on 60 caps rather than base 100. 5000mg of powder would make 200 25mg caps.... so I dropped it to 180 caps. Which makes the caps come out to about 27.7mg.

Using this base... I dropped 82 grams of creatine in a jar and added the 5 grams of anavar. Making it 87 grams total (which is 29 * 3 for the math impaired). Very simple really and dosing is really accurate based on my results. It actually came out perfect. No powder left over at all.

Hope this helps.

this process may have worked this time, but it is NOT the way to measure when capping bro. Different powders have a different density and different volume/mg of powder........5 grams of winny for example will take up MUCH more space than 5 grams of anavar, so you have to use some math to account for the changes there, which can be huge depending on the filler you used and the substance you are capping.......since your capping worked out well as you said the creatine and anavar powder must have been close to the same density.

i've posted the math to do this on some other posts also

 

[ass_face]

this process may have worked this time, but it is NOT the way to measure when capping bro. Different powders have a different density and different volume/mg of powder........5 grams of winny for example will take up MUCH more space than 5 grams of anavar, so you have to use some math to account for the changes there, which can be huge depending on the filler you used and the substance you are capping.......since your capping worked out well as you said the creatine and anavar powder must have been close to the same density.

i've posted the math to do this on some other posts also

For Winny I use Corn starch. Very true... this isn't an exact science... but it still comes pretty close. The key is to find a filler that has the same volume and and density as the compound. Var works well with creatine. Winny is great with Corn starch. This process has always worked 100% of the time for me. As long as the filler roughly matches the powder density... it is pretty full proof. So this IS the way to measure when capping.... bro

 

[drrman]

For Winny I use Corn starch. Very true... this isn't an exact science... but it still comes pretty close. The key is to find a filler that has the same volume and and density as the compound. Var works well with creatine. Winny is great with Corn starch. This process has always worked 100% of the time for me. As long as the filler roughly matches the powder density... it is pretty full proof. So this IS the way to measure when capping.... bro

agree it is "A" way to measure when capping but you can't give people directions to do it the way you said bro, people do NOT know that they need to find a substance to fill with that is close to density and volume, maybe you have found something for one or two things and creatine and other substances may work well for them, but it is NOT the correct way to cap powders, maybe "a" possible way for certain substances with certain fillers but again you leave WAY WAY too much room for variables with this

 

[ass_face]

agree it is "A" way to measure when capping but you can't give people directions to do it the way you said bro, people do NOT know that they need to find a substance to fill with that is close to density and volume, maybe you have found something for one or two things and creatine and other substances may work well for them, but it is NOT the correct way to cap powders, maybe "a" possible way for certain substances with certain fillers but again you leave WAY WAY too much room for variables with this

I was being very specific to one powder. Anavar. I would think anyone with any common sense would realize that the filler has to match the powder in consistency and density. Also, this is for home use. If I was making this for commercial sale, your damn right... I would be far more precise. I just wrote that off the top of my head... not like I was trying to school everyone. People need to figure shit out on their own. I only spoke of a process that has been 100% successful for myself. take it or leave it.

 

[Douro]

Micro creatine and maltodextrine works fine with var powder.