Please Scroll Down to See Forums Below
napsgear
genezapharmateuticals
domestic-supply
puritysourcelabs
UGL OZ
UGFREAK
napsgeargenezapharmateuticals domestic-supplypuritysourcelabsUGL OZUGFREAK

any body know the Magic Solution in fina??

europe, its obvious from your comments that you have never done a conversion yourself, at least not with an A kit. The final product is almost 100% of the tren you put in and very little of the filler and such. After all, the pellets themselves are injected into a cow and ya dont see the cow dieing cause of it. The fillers and what not are basically harmless, but removed nonetheless.
 
Cornholio said:


The Acetone method will work very nicely, assuming you have access to 5 9's Acetone.

Never heard of acetone at 5' 9s purity. The purist form I've seen is used for spectrophotometry, which is a test that is not tolerant of impurities. This grade is listed at 99.9 with a residue after evaporation of 1mg/L ( .01mg/10ml ) . I suspect that your girlfirend absorbs a hell of alot more acetone than that just doing her nails. I've used this grade with fina and have been very happy with the results. next month I'll be using it to extract test undeconate from andriol caps and mixing with sunflower oil to obtain a final product at 200mg/ml. Will post results.

peace,

Hard,
 
hard said:


Never heard of acetone at 5' 9s purity. The purist form I've seen is used for spectrophotometry, which is a test that is not tolerant of impurities. This grade is listed at 99.9 with a residue after evaporation of 1mg/L ( .01mg/10ml ) . I suspect that your girlfirend absorbs a hell of alot more acetone than that just doing her nails. I've used this grade with fina and have been very happy with the results. next month I'll be using it to extract test undeconate from andriol caps and mixing with sunflower oil to obtain a final product at 200mg/ml. Will post results.

peace,

Hard,


Being a chemist - I have access to Fisher-Brand Ultra grade solvents.

I had GREAT success using this procedeure.

What are you trying to separate from the Test Undec. caps?? Filler??
 
Cornholio said:



Being a chemist - I have access to Fisher-Brand Ultra grade solvents.

I had GREAT success using this procedeure.

What are you trying to separate from the Test Undec. caps?? Filler??

The acetone is used to wash the residual test from the inside of the caps - I figure thats gotta be worth an extra 10% in final product as opposed to just pouring them out. Any idea on 1/2 life of undeconate done IM.?


Hard
 
Cool...

hard said:


The acetone is used to wash the residual test from the inside of the caps - I figure thats gotta be worth an extra 10% in final product as opposed to just pouring them out. Any idea on 1/2 life of undeconate done IM.?


Hard

I could be wrong, but I seem to remember Duchaine giving an interview where he talked about kitchen chemistry. I think he mentioned making Andriol into an injectable and suggested a dosing schedule of 36-48 hours as opposed to every 4-6.
 
brama said:


The maker of the KITS is a Chemist and a great one at that , everything in his MAGIC solution, kits, and or accessories is calculated, researched and for a reason, on that note if you arent qualified.....lets just say hey its your health dude.

Animal, the chemist?? Bwahahahahahahah
 
yes, zyglamail I have never used a fina kit. If I would extract tren.ac. from those pellets I would only use laboratory conditions and lab. ware. But I don't offend any people doing it. I just said that I wouldn't inject it in my body. By the way the cows are treated for slaughtering after and I hope you are not.
 
Thats fine europe, each to thier own bro. However, even though kits in general arent the most sterile method, I have had some nasty shit insode my body, rusty nails, huge chunks of glass, all sorts of dirt in deep wounds etc etc. In addition, how sterile is some of this "undergoround lab" stuff people pay top dollar for. For me, it may not be 100% sterile, but at least I did it and know what the conditions were. Also, in all honesty, I have seen very few if any probs from A kits that could actually be contributed to the conversion chemicals or process itself.
 
hard said:


The acetone is used to wash the residual test from the inside of the caps - I figure thats gotta be worth an extra 10% in final product as opposed to just pouring them out. Any idea on 1/2 life of undeconate done IM.?


Hard

Test. Undecanoate is a vey long ester.

Its half-life is roughly the same(actually a tad more)
than Test. Decanoate(Found in Sustanon).

Please keep us poted on your attempt to
produce inj. andriol from the gel caps.

I was thinking abouth this a while ago, as the
rather long ester would be longer than either Cyp
or enanthate. Therefore, less water retention.

The logistics of separating all the crap in the
cap are staggering though. HPLC was the method
I was going to use.

It would be expensive though, as andriol is VERY
expensive compared to other tests.


Godspeed
 
Ok thats it - I gotta do it now..I got caps sitting there doing nothing and there is no way I'm going to waste them orally. If someone gives me the name of a good testing lab I'll send in a ml to check my results.

In the name of science,

Hard
 
Top Bottom