5000iu amp HCG - how to split it?

[NXG+]

Hey guys,

The last time I had HCG I had 3x1500iu amps with 3 individual 1ml amps of bac water.

This time it has come through in one 5000iu amp with one 1ml amp of bac water. I want to use ~250iu twice a week while on cycle, so I need to split the damn thing into like 20 doses! I have slin pins for sub-q injects.

I have 2 questions:

1) How is best to do it? I'll need some more bac water, right?

2) If i mix the whole lot up at once, how long will it last? Doesnt this stuff 'go off' after a while? I'm planning to use it weeks 3-10 of a 10 week cycle, i'm just finishing week 2 right now.


Any help will be appreciated, thank you guys.

 

[micksnowdog]

the water it comes with is not bacteriostatic water, dump it.
open amp, slowly run water down the side into it, withdraw it into syringe, put vent pin in top of sealed sterile vial, inject it slowly into the vial. can last up to 60days but the most regular answer you will get is 30days. if you put 5000iu into 2ml it will be 2500iu per ml or 1/5th of a ml will be your weekly inject of 500iu.
store in fridge, it is heat sensitive and shock sensitive. dont let it freeze.

 

[sonicwaste]

he hit the nail right on the head... I like mixing a 5000iu amp with 5ml BW... Makes it easier measurements for me

 

[eClenbuterol]

Yup I prefer 1000IUs per ML max for easiest measurements.

 

[NXG+]

can last up to 60days but the most regular answer you will get is 30days.

store in fridge, it is heat sensitive and shock sensitive. dont let it freeze.

Ok cool, I'll go grab some BW now then.

In terms of making it last...I need it to last more towards the 60 day mark than the 30.

Would you recommend trying to split the actual powder into 2 and mixing up one lot now and another in 30 days time?

Thank you to everyone for the help so far.

 

[MSA122]

Ok cool, I'll go grab some BW now then.

In terms of making it last...I need it to last more towards the 60 day mark than the 30.

Would you recommend trying to split the actual powder into 2 and mixing up one lot now and another in 30 days time?

Thank you to everyone for the help so far.

it'll be good in the fridge for 60 days, no problem for weeks 3 - 10; don't try splitting the powder.

 

[swole]

solid HCG thread, esp post 2 and 3

http://www.elitefitness.com/forum/anabolic-steroids/help-hcg-584086.html

 

[websy21]

Call me dumb but where do you get this bacteriostatic water?

 

[micksnowdog]

i aint calling you dumb cos i cant get it in my country either, i've had to order the poly-whatever80 and BA i think it is to make my own.
these clowns never sent it to me, told me customs must have it, fuckers, it was $30 in my currency.
bacteriostatic-water.co.uk

 

[Mac173]

Call me dumb but where do you get this bacteriostatic water?

Plenty of sites sell it. Pretty much any one that sells pins and related products.

 

[websy21]

Plenty of sites sell it. Pretty much any one that sells pins and related products.

So you can't just buy it locally in a pharmacy, etc ? Why can't you use the water that comes with it? Why the hell would they send the package with this 'other' water that isn't safe to use? This sounds retarded to me. I haven't got my kit yet but its on the way. I guess I will have to wait and see....

 

[Mac173]

So you can't just buy it locally in a pharmacy, etc ? Why can't you use the water that comes with it? Why the hell would they send the package with this 'other' water that isn't safe to use? This sounds retarded to me. I haven't got my kit yet but its on the way. I guess I will have to wait and see....

I'm not sure if you can buy bac water in a pharmacy or not. I would imagine so. My residing state will not sell any type products without an RX so I've never even bothered to check. You can buy a 30mL bottle of bacteriostatic water for around 5$ at many online sites.

 

[usmcnut]

If you want to do 250iu per inject and have a 5000iu hcg kit. Get some bac water.. And a new vile. Put 1 cc of bac water in the vile and 1cc bac water in the power and mix well. Withdraw the hcg out of the amp and inject into the vile with 1cc already in it.

Now you have a 2cc of hcg ready to use. With a slin pin every 10 mark will be 250iu.

 

[Mac173]

This is the way I mix HCG.

I always used the 5000iu vials, but the concept is basically still the same considering you have amps.

Inject 1mL bac water into HCG vial. Contents should basically dissolve on impact but some swishing may be required.

Remove solution and inject into empty sterile vial. You now have 5000iu/mL.

Add additional bac water to achieve desired concentration.

For me personally I prefered 500iu/mL, in which case I would add an additional 9mL of bac water resulting in 5000iu/10mL or 500iu/mL.

Hope this clears this process up.

 

[usmcnut]

This is the way I mix HCG.

I always used the 5000iu vials, but the concept is basically still the same considering you have amps.

Inject 1mL bac water into HCG vial. Contents should basically dissolve on impact but some swishing may be required.

Remove solution and inject into empty sterile vial. You now have 5000iu/mL.

Add additional bac water to achieve desired concentration.

For me personally I prefered 500iu/mL, in which case I would add an additional 9mL of bac water resulting in 5000iu/10mL or 500iu/mL.

Hope this clears this process up.

But why add all that bac water? Just keep it at 1cc of bac water. Then you only have to inject a VERY small amount. The first 10 mark on a slinpin will be 500ius. Why inject a full cc when you can achieve the same thing by only injecting 1/10 the amount. ??

 

[websy21]

But why add all that bac water? Just keep it at 1cc of bac water. Then you only have to inject a VERY small amount. The first 10 mark on a slinpin will be 500ius. Why inject a full cc when you can achieve the same thing by only injecting 1/10 the amount. ??

Hmm exactly my thoughts too but I haven't had the experience with this stuff yet so I will have to wait and see...

 

[usmcnut]

Hmm exactly my thoughts too but I haven't had the experience with this stuff yet so I will have to wait and see...

It works great the way I said... You don't need 9/10ths of bac water in you a pop. It is ready to inject with only that 1cc of bac water...

If you want a little more water add 2cc's to 5000iu powder. Then at every 20 mark will be 500ius.
If you wanna try it... use 500ius every 5 days why on cycle and your balls will swing for days!! LOL!

 

[Mac173]

It works great the way I said... You don't need 9/10ths of bac water in you a pop. It is ready to inject with only that 1cc of bac water...

If you want a little more water add 2cc's to 5000iu powder. Then at every 20 mark will be 500ius.
If you wanna try it... use 500ius every 5 days why on cycle and your balls will swing for days!! LOL!

Less margin of error basically. Injecting 1cc is completley painless anyway, especially when it's bac water.

 

[usmcnut]

Less margin of error basically. Injecting 1cc is completley painless anyway, especially when it's bac water.

Less margin of error? What?
How hard is it to add 1cc of bac water to power then mix, then remove hcg and transfer to new vile.
Then every inject, fill slin pin to the first 10mark and inject. All your doing is injecting almost a full cc of water. Why? And don't say margin of error cause that makes no sense. Is it because thats the way to were taught? I'm not trying to be a dick bro... don't get me wrong.. Just saying there is no need for a full cc for only 500ius.

 

[swole]

Less margin of error? What?
How hard is it to add 1cc of bac water to power then mix, then remove hcg and transfer to new vile.
Then every inject, fill slin pin to the first 10mark and inject. All your doing is injecting almost a full cc of water. Why? And don't say margin of error cause that makes no sense. Is it because thats the way to were taught? I'm not trying to be a dick bro... don't get me wrong.. Just saying there is no need for a full cc for only 500ius.

I use the same method and inject 1cc for 500iu.

When he says margin of error think of it this way - if you're off "a little bit" with your 1/10 mark on the slin pin, it is far greater a mistake than me being off "a little bit" with my 1cc. You can potentially be injecting double the amount if you're off 1 tick with your 1/10 cc method.

It's just preference, no need to argue. The end justifies the means.

And yes, sometimes HCG with bacto water stings a bit.

 

[swole]

Less margin of error? What?
How hard is it to add 1cc of bac water to power then mix, then remove hcg and transfer to new vile.
Then every inject, fill slin pin to the first 10mark and inject. All your doing is injecting almost a full cc of water. Why? And don't say margin of error cause that makes no sense. Is it because thats the way to were taught? I'm not trying to be a dick bro... don't get me wrong.. Just saying there is no need for a full cc for only 500ius.

I use the same method and inject 1cc for 500iu.

When he says margin of error think of it this way - if you're off "a little bit" with your 1/10 mark on the slin pin, it is far greater a mistake than me being off "a little bit" with my 1cc. You can potentially be injecting double the amount if you're off 1 tick with your 1/10 cc method.

It's just preference, no need to argue. The end justifies the means.

And yes, sometimes HCG with bacto water stings a bit.

 

[usmcnut]

I use the same method and inject 1cc for 500iu.

When he says margin of error think of it this way - if you're off "a little bit" with your 1/10 mark on the slin pin, it is far greater a mistake than me being off "a little bit" with my 1cc. You can potentially be injecting double the amount if you're off 1 tick with your 1/10 cc method.

It's just preference, no need to argue. The end justifies the means.

And yes, sometimes HCG with bacto water stings a bit.

Oh I was arguing at all. Just wondering.
And swole even if someone did mess up and go to the 2nd 10 mark you are only injecting 1000ius, well under the 2000ius a week range that most people swear by that you shouldn't exceed.
You are right it is all preference, but I was also getting at that there is alot of alcohol in that bac water for a full ml.

 

[Mac173]

I use the same method and inject 1cc for 500iu.

When he says margin of error think of it this way - if you're off "a little bit" with your 1/10 mark on the slin pin, it is far greater a mistake than me being off "a little bit" with my 1cc. You can potentially be injecting double the amount if you're off 1 tick with your 1/10 cc method.
It's just preference, no need to argue. The end justifies the means.

And yes, sometimes HCG with bacto water stings a bit.

There ya go. Someone gets it. Didn't think I needed to explain that concept but I guess so.

USMCNUT- It's a matter of persoanl preference. I feel no difference whatsoever regarding pain and irritation from an additional 9/10cc of bac water so that's how I do it. If that's not the case for you then make yours with a higher concentration. That's why I specifically stated in my post "desired concentration".