Ozcanium Analytics - Aus local HPLC LC-MS/MS Purity Assay and Identification

[Ozcanium Analytics]

Hello All,

Its Ibrahim from Ozcanium Analytics here.

We’re an Australian analytical lab which specialise in testing for oils, tablets/caps, peptides and blends based in Sydney. I thought it was worth making a quick intro here because a lot of the Aussie community already gets products tested, but most of it still gets sent overseas, and people seem to have lots of logistics problems.

Nothing against Janoshik, they’ve clearly done a lot for this space and people trust their reports. The main issue for Australians is the obvious one: sending samples overseas is slow, annoying, and sometimes the samples simply don’t make it. We’re trying to give the local market a proper Australian option.

We routinely analyse things like:

Oils: testosterone, trenbolone, masteron(drostanolone), primobolan, nandrolone, blends, etc.
Orals: Anavar/oxandrolone, Aromasin/exemestane, Winstrol, Anadrol, Cialis-type products and similar.
Peptides: Retatrutide, GHK-Cu, BPC-157, TB-500, KPV, melanotan-type peptides, HGH and others depending on the exact sample.
Stacks/blends: KLOW, GLOW, mixed peptide blends and multi-compound samples.

Routine samples are usually $350 AUD.
Stacks/blends are usually $550 AUD because they take more work to separate and confirm properly.

Turnaround is usually 3–7 days from when we receive the sample, assuming it’s a normal sample and not something that needs custom method development.

We run HPLC/UPLC with LC-MS/MS confirmation. So for a normal report we’re looking at the chromatogram, peak area/purity where suitable, and mass spec confirmation so we can say whether the claimed compound is actually there. For some compounds we use SIM or MRM/MS-MS transitions as well, especially when identity needs to be nailed down properly.
We’ve already done testing for a few people/vendors connected to this space, and we’re happy for people to judge us by the quality of the reports and the consistency of the work.

We’re not a source, we don’t sell anything being tested, and we don’t advise or condone anyone on use. We just test the sample and report what we find in a transparent and analytical fashion.

If anyone wants to ask about a sample, pricing, turnaround, or whether something is testable, message me here or contact us directly:

Email: [email protected]
Phone: 0407 260 481
Website: ozcaniumanalytics.com.au

Happy to answer questions.

 

[abolone]

Hello All,

Its Ibrahim from Ozcanium Analytics here.

We’re an Australian analytical lab which specialise in testing for oils, tablets/caps, peptides and blends based in Sydney. I thought it was worth making a quick intro here because a lot of the Aussie community already gets products tested, but most of it still gets sent overseas, and people seem to have lots of logistics problems.

Nothing against Janoshik, they’ve clearly done a lot for this space and people trust their reports. The main issue for Australians is the obvious one: sending samples overseas is slow, annoying, and sometimes the samples simply don’t make it. We’re trying to give the local market a proper Australian option.

We routinely analyse things like:

Oils: testosterone, trenbolone, masteron(drostanolone), primobolan, nandrolone, blends, etc.
Orals: Anavar/oxandrolone, Aromasin/exemestane, Winstrol, Anadrol, Cialis-type products and similar.
Peptides: Retatrutide, GHK-Cu, BPC-157, TB-500, KPV, melanotan-type peptides, HGH and others depending on the exact sample.
Stacks/blends: KLOW, GLOW, mixed peptide blends and multi-compound samples.

Routine samples are usually $350 AUD.
Stacks/blends are usually $550 AUD because they take more work to separate and confirm properly.

Turnaround is usually 3–7 days from when we receive the sample, assuming it’s a normal sample and not something that needs custom method development.

We run HPLC/UPLC with LC-MS/MS confirmation. So for a normal report we’re looking at the chromatogram, peak area/purity where suitable, and mass spec confirmation so we can say whether the claimed compound is actually there. For some compounds we use SIM or MRM/MS-MS transitions as well, especially when identity needs to be nailed down properly.
We’ve already done testing for a few people/vendors connected to this space, and we’re happy for people to judge us by the quality of the reports and the consistency of the work.

We’re not a source, we don’t sell anything being tested, and we don’t advise or condone anyone on use. We just test the sample and report what we find in a transparent and analytical fashion.

If anyone wants to ask about a sample, pricing, turnaround, or whether something is testable, message me here or contact us directly:

Email: [email protected]
Phone: 0407 260 481
Website: ozcaniumanalytics.com.au

Happy to answer questions.

Welcome to the forum brother, good to know we have local Aussies doing HPLC testing. Can you share a few results with us all.

How are you different to janoshi?
I like the 3-7day turn around is a huge game changer!

 

[ted123]

Hello All,

Its Ibrahim from Ozcanium Analytics here.

We’re an Australian analytical lab which specialise in testing for oils, tablets/caps, peptides and blends based in Sydney. I thought it was worth making a quick intro here because a lot of the Aussie community already gets products tested, but most of it still gets sent overseas, and people seem to have lots of logistics problems.

Nothing against Janoshik, they’ve clearly done a lot for this space and people trust their reports. The main issue for Australians is the obvious one: sending samples overseas is slow, annoying, and sometimes the samples simply don’t make it. We’re trying to give the local market a proper Australian option.

We routinely analyse things like:

Oils: testosterone, trenbolone, masteron(drostanolone), primobolan, nandrolone, blends, etc.
Orals: Anavar/oxandrolone, Aromasin/exemestane, Winstrol, Anadrol, Cialis-type products and similar.
Peptides: Retatrutide, GHK-Cu, BPC-157, TB-500, KPV, melanotan-type peptides, HGH and others depending on the exact sample.
Stacks/blends: KLOW, GLOW, mixed peptide blends and multi-compound samples.

Routine samples are usually $350 AUD.
Stacks/blends are usually $550 AUD because they take more work to separate and confirm properly.

Turnaround is usually 3–7 days from when we receive the sample, assuming it’s a normal sample and not something that needs custom method development.

We run HPLC/UPLC with LC-MS/MS confirmation. So for a normal report we’re looking at the chromatogram, peak area/purity where suitable, and mass spec confirmation so we can say whether the claimed compound is actually there. For some compounds we use SIM or MRM/MS-MS transitions as well, especially when identity needs to be nailed down properly.
We’ve already done testing for a few people/vendors connected to this space, and we’re happy for people to judge us by the quality of the reports and the consistency of the work.

We’re not a source, we don’t sell anything being tested, and we don’t advise or condone anyone on use. We just test the sample and report what we find in a transparent and analytical fashion.

If anyone wants to ask about a sample, pricing, turnaround, or whether something is testable, message me here or contact us directly:

Email: [email protected]
Phone: 0407 260 481
Website: ozcaniumanalytics.com.au

Happy to answer questions.

Welcome to EF brother @Ozcanium Analytics. Great that we have a local AU contact to support the community with any testing requirements.

 

[Nighthawk007]

Is it possible to add content in mg to your tests not just purity?
@Ozcanium Analytics

 

[ted123]

Is it possible to add content in mg to your tests not just purity?
@Ozcanium Analytics

Good point.This will then give a true reading end to end with the compound that is being tested.

@Ozcanium Analytics is this something that can be added easily?

 

[Stannns]

Yes it’s good to know the purity. But you really have to be able to confirm the contents of the products you are testing in mg to make these reports legit.

 

[MUSTANG_18]

Hello All,

Its Ibrahim from Ozcanium Analytics here.

We’re an Australian analytical lab which specialise in testing for oils, tablets/caps, peptides and blends based in Sydney. I thought it was worth making a quick intro here because a lot of the Aussie community already gets products tested, but most of it still gets sent overseas, and people seem to have lots of logistics problems.

Nothing against Janoshik, they’ve clearly done a lot for this space and people trust their reports. The main issue for Australians is the obvious one: sending samples overseas is slow, annoying, and sometimes the samples simply don’t make it. We’re trying to give the local market a proper Australian option.

We routinely analyse things like:

Oils: testosterone, trenbolone, masteron(drostanolone), primobolan, nandrolone, blends, etc.
Orals: Anavar/oxandrolone, Aromasin/exemestane, Winstrol, Anadrol, Cialis-type products and similar.
Peptides: Retatrutide, GHK-Cu, BPC-157, TB-500, KPV, melanotan-type peptides, HGH and others depending on the exact sample.
Stacks/blends: KLOW, GLOW, mixed peptide blends and multi-compound samples.

Routine samples are usually $350 AUD.
Stacks/blends are usually $550 AUD because they take more work to separate and confirm properly.

Turnaround is usually 3–7 days from when we receive the sample, assuming it’s a normal sample and not something that needs custom method development.

We run HPLC/UPLC with LC-MS/MS confirmation. So for a normal report we’re looking at the chromatogram, peak area/purity where suitable, and mass spec confirmation so we can say whether the claimed compound is actually there. For some compounds we use SIM or MRM/MS-MS transitions as well, especially when identity needs to be nailed down properly.
We’ve already done testing for a few people/vendors connected to this space, and we’re happy for people to judge us by the quality of the reports and the consistency of the work.

We’re not a source, we don’t sell anything being tested, and we don’t advise or condone anyone on use. We just test the sample and report what we find in a transparent and analytical fashion.

If anyone wants to ask about a sample, pricing, turnaround, or whether something is testable, message me here or contact us directly:

Email: [email protected]
Phone: 0407 260 481
Website: ozcaniumanalytics.com.au

Happy to answer questions.

welcome to EF you have testing examples?

 

[ChewedSleek]

Hello All,

Its Ibrahim from Ozcanium Analytics here.

We’re an Australian analytical lab which specialise in testing for oils, tablets/caps, peptides and blends based in Sydney. I thought it was worth making a quick intro here because a lot of the Aussie community already gets products tested, but most of it still gets sent overseas, and people seem to have lots of logistics problems.

Nothing against Janoshik, they’ve clearly done a lot for this space and people trust their reports. The main issue for Australians is the obvious one: sending samples overseas is slow, annoying, and sometimes the samples simply don’t make it. We’re trying to give the local market a proper Australian option.

We routinely analyse things like:

Oils: testosterone, trenbolone, masteron(drostanolone), primobolan, nandrolone, blends, etc.
Orals: Anavar/oxandrolone, Aromasin/exemestane, Winstrol, Anadrol, Cialis-type products and similar.
Peptides: Retatrutide, GHK-Cu, BPC-157, TB-500, KPV, melanotan-type peptides, HGH and others depending on the exact sample.
Stacks/blends: KLOW, GLOW, mixed peptide blends and multi-compound samples.

Routine samples are usually $350 AUD.
Stacks/blends are usually $550 AUD because they take more work to separate and confirm properly.

Turnaround is usually 3–7 days from when we receive the sample, assuming it’s a normal sample and not something that needs custom method development.

We run HPLC/UPLC with LC-MS/MS confirmation. So for a normal report we’re looking at the chromatogram, peak area/purity where suitable, and mass spec confirmation so we can say whether the claimed compound is actually there. For some compounds we use SIM or MRM/MS-MS transitions as well, especially when identity needs to be nailed down properly.
We’ve already done testing for a few people/vendors connected to this space, and we’re happy for people to judge us by the quality of the reports and the consistency of the work.

We’re not a source, we don’t sell anything being tested, and we don’t advise or condone anyone on use. We just test the sample and report what we find in a transparent and analytical fashion.

If anyone wants to ask about a sample, pricing, turnaround, or whether something is testable, message me here or contact us directly:

Email: [email protected]
Phone: 0407 260 481
Website: ozcaniumanalytics.com.au

Happy to answer questions.

Welcome to the EF Community, @Ozcanium Analytics!

It’s great to see a local source for testing! I feel like a local option with a faster turn around, will be more encouraging for members and vendors in our community. Which in turn helps keep our community safe!

 

[armsbruh]

Welcome to EF brother @Ozcanium Analytics. Great that we have a local AU contact to support the community with any testing requirements.

I second this. Purity testing great for raws etc but most here are the end consumer and would like to know if products are under/over as well.

 

[armsbruh]

Is it possible to add content in mg to your tests not just purity?
@Ozcanium Analytics

Was referring to this

 

[Ozcanium Analytics]

Yes, we can report content, not just purity and identity.
The specifics depend a little more on the form of material (oil peptide or capsule/tab).

One caveat though: a mg/vial result is for the exact vial we test. It does not scientifically prove every vial in the batch has the exact same amount. With lyophilised peptide vials especially, there is always up to 10+% variation from vial to vial. These vials are usually filled by machines, and then proceed to be lyophilised. So if one vial tests at 10.3 mg, that means the vial tested was 10.3 mg. It does not automatically mean every vial in the batch is 10.3 mg.

With regards to example reports, ill put up a redacted example.

 

[koba]

Yes, we can report content, not just purity and identity.
The specifics depend a little more on the form of material (oil peptide or capsule/tab).

One caveat though: a mg/vial result is for the exact vial we test. It does not scientifically prove every vial in the batch has the exact same amount. With lyophilised peptide vials especially, there is always up to 10+% variation from vial to vial. These vials are usually filled by machines, and then proceed to be lyophilised. So if one vial tests at 10.3 mg, that means the vial tested was 10.3 mg. It does not automatically mean every vial in the batch is 10.3 mg.

With regards to example reports, ill put up a redacted example.

This is great news!
I have been doing some research on your company, before giving your services my vote of approval, for the safety of our EF community.
May I ask why I can't find any reviews as yet on the Internet for your company?

 

[Ozcanium Analytics]

Fair Question,
The main reason is that we have not traditionally been a retail/customer review type business. Most analytical labs work with businesses, manufacturers, private clients, research projects, fragrance/flavour/cosmetic samples, essential oils, and similar work where the results are confidential. Those clients usually do not publicly review the lab or post what they had tested.

This community-facing testing service is newer, so the public review trail is still being built. I understand that means people will want proof over claims.

That’s why I’m happy to provide redacted example reports, answer technical questions openly, and have mods/trusted members verify with us directly or submit independent samples if needed. Trust in this space has to be earned through repeated, consistent results, and that’s exactly how we’re trying to approaching it.

Hope that answers your question?

 

[cejay]

Welcome

Absolutely awesome service to be adding here !!