Please Scroll Down to See Forums Below 
perp69
New member
Great article on how to prepare and inject HGH.
How to Prepare HGH Human Growth Hormone Injections and How to inject
Johnny Freeman | August 1, 2007
Human Growth Hormone (HGH, Somatropin) is considered a wonder substance by many people due to its favorable properties. It may look complicated for administration, but when a mixture of HGH and sterile water is prepared in the right way, it can only bring benefits. This article is describing how to prepare and inject HGH solution.
How to Prepare HGH Human Growth Hormone Injections and How to inject
Human Growth Hormone (HGH) is considered as a wonder drug by many. It is gaining popularity over the last few years and it seems to be increasing from day to day. Its favorable properties and the fact it is virtually untraceable drug are probably the main two reasons. This article will focus on how to prepare HGH injections and how to inject properly, which is necessary for successful administration
About HGH
HGH is the hormone in charge of control to many functions, as well as benefits associated with youth, such as vitality, smooth skin, energy and resilience. HGH is naturally produced in the pituitary gland of the brain. It is also gaining popularity among athletes and bodybuilders due to numerous benefits associated with its use: decreased fat, increased muscle mass, high energy and even increased sex drive. It stimulates growth in most body tissues by increasing the number of cells rather than their size including skeletal muscle tissue, and with the exception of eyes and brain all other body organs. Growth hormone also stimulates triglyceride hydrolysis in adipose tissue, usually producing notable fat loss during treatment. HGH increases glucose output in the liver, and induces insulin resistance by blocking the activity of this hormone in target cells. This effect is seen where fats become a more primary source of fuel, further enhancing body fat loss. Human Growth Hormone is also a "piss-test" safe drug, since there is currently no reliable method for detecting the drug during a standard urinalysis.
HGH can be found under several commercial names as HGH, Saizen, Somatohorm, Nutropin, Genotropin, Humatrope, HGH Somatripin, Somatropin EuroHormones, Sytropin, Jintropin and many more.
HGH Injecting Technique
Self-injecting HGH may seem complicated, especially when doing it for the first time. The second and each time after that will be much easier. Luckily HGH is being injected under the skin (subcutaneously), which makes the whole process less complicated, because needle doesn’t penetrate as much as with other injection types, i.e. when injecting directly into a vein or muscle (intravenous or intra muscular injections).
What Do You Need
Needle and SyringeTo inject HGH to types of needles are needed; the short and the longer one to prepare the HGH-Sodium Chloride mixture and the shorter one to inject. Generally, a 25- to 27-gauge, 5/8-inch-long needle is an appropriate one. It is very important you use new needles only, taken directly from the plastic cap before using.
Syringe Barrel is a plastic tube that holds the liquid to be injected. Just like a ruler, it has lines to tell you how much liquid is inside. The tip of the barrel should have a plastic protector to maintain sterility. To inject HGH we only need one syringe, which will be used twice: to add sterile water to HGH vial and to give yourself an injection afterwards.
HGH and Sterile WaterHuman Growth Hormone ampoule and Sodium Chloride Injection Water (also referred as sterile water) to dissolve HGH are the crucial ones. Different types and brands are available, however Anabolic247.com experts suggest Somatropin from EuroHormones Pharmaceuticals in Macedonia.
Other AccessoriesAlcohol Swabs are used to clean the injection spot, as well as to clean the vial tops before starting the mixing procedure. Adhesive Bandage and gauze pad are optional to cover the injection spot at the end. These are available prepackaged at any pharmacy and most grocery stores.
You may also need Disposable Rubber Gloves if anyone else is giving the injection but yourself (i.e. a friend). It is vital he uses gloves to maintain sterility throughout the injecting process.
An appropriate placeA good, clean and peaceful place with sufficient lights and a flat work surface is highly recommended. You need to be concentrated throughout the process; therefore no one should disturb you. Now that you have organized your supplies, select a good work surface.
And before you start: make sure the work area is clean and to wash your hands.
Prepare an Injection
The best time to inject according to Anabolic247.com experts is right before going to bed. Typically more growth hormone is secreted at night than during the day.
Step 1Clean the surface (i.e. table) and organize everything you need.
Step 2Wash your hands with soap and warm water. If someone else is giving you the injection, he or she should put on a pair of disposable gloves now.
Step 3Remove the plastic flip tops from Human Growth Hormone ampoule and sterile water vials and throw them away. Clean rubber stoppers on both vials with a fresh alcohol swab and throw it away. Don’t touch the tops after being sterilized! (otherwise clean them again using a new alcohol swab)
Step 4Unwrap the syringe and a long needle (without touching a needle!) Take the plastic tip protector from the syringe, hold the syringe and twist tightly into place on the needle and then remove the plastic cap from the needle. Set it aside as you will need it later on. Pull back the plunger in the syringe until it reaches the 1 cc line on the barrel.
Step 5Place the vial of sterile water on the clean work surface. Take the syringe with a longer needle on and push it straight down through the middle of the rubber stopper on top of the vial. Push on the syringe plunger all the way down, which will push the 1cc of previously pumped air into the vial. This will create some pressure in it. While holding the plunger down, pick up the vial and the syringe with your other hand and turn it upside down. Slide the needle tip below the level of water in the vial.Then release the plunger, which will fills the syringe with water automatically. Alternatively pull back on the plunger until it reaches the 1cc mark on the syringe barrel. If air bubbles get in the syringe, tap the barrel with your fingertips, and then gently push the plunger in to move the air bubble(s) back into the vial.When the syringe is filled with sterile water remove the vial off the needle without touching the needle tip.
Step 6In the next step mix the sterile water with the Human Growth Hormone vial. To do this hold the needle and syringe containing sterile water and push the needle through rubber stopper on HGH vial and inject the Sterile Water into it. The needle tip should rest against the wall of the vial. Push the syringe plunger gently and slowly to allow the water to flow down the side of the vial.
Step 7Remove the needle from HGH vial and put the syringe aside. Shake the HGH vial mixed with Sterile water gently in slow round motion. Pull back the plunger to get some air into the syringe and insert it back into a HGH vial. Push the plunger to create pressure in the vial, which will help you pump the solution out. When a vial is empty, turn arround the syringe that needle is at the top.
Step 8Take the empty plastic cap from larger needle and remove it. Place a smaller needle needed to inject and make sure there are no air bubbles in the syringe.And you are ready to inject.
How to Inject
Choose the injection site for subcutaneous injection. Probably the most convenient, easiest and comfortable site is the anterior abdomen (belly). It is important to avoid the area directly around the belly button (umbilicus). When the spot is selected, clean it with a new, fresh alcohol sponge and allow the area to air dry.
Use your non-dominant hand (left hand for right handed people) pinch a fold of skin and hold it up. Use your dominant hand to pick up the syringe and dart it in to the skin fold quickly. Insert the entire needle perpendicular to the skin and keep it there. If you can pinch a 1-inch (2.5-cm) tissue fold, insert the needle at a 45-degree angle; for a 2-inch (5-cm) fold, insert it at a 90-degree angle. Make sure fluid is injected slowly, followed by quick needle removal. Additionally use a clean alcohol sponge to hold pressure on the injection site for a moment or two.
Don’t-s
When injecting Human Growth Hormone subcutaneously it is important not to aspirate after inserting the needle to prevent tissue damage, hematoma formation, and bruising. After the taking HGH don’t massage the site as it may cause damages to the underlying tissue and increase the medication absorption rate to an undesired (fast) rate.
Conclusion
Human Growth Hormone (i.e. Somatropin) can bring a lot of benefits, however when it is prepared and administered in the right way. The injection preparation may seem complicated, but will become a routine after repeating it several times. It is worth to be persistentArticle Search, as it brings excellent results on the long run.
ABOUT THE AUTHOR
John Freeman, a senior consultant at Anabolic247.com specialising in sport performance in fitness by workout, proper diet, anabolic steroids and supplements.
How to Prepare HGH Human Growth Hormone Injections and How to inject
Johnny Freeman | August 1, 2007
Human Growth Hormone (HGH, Somatropin) is considered a wonder substance by many people due to its favorable properties. It may look complicated for administration, but when a mixture of HGH and sterile water is prepared in the right way, it can only bring benefits. This article is describing how to prepare and inject HGH solution.
How to Prepare HGH Human Growth Hormone Injections and How to inject
Human Growth Hormone (HGH) is considered as a wonder drug by many. It is gaining popularity over the last few years and it seems to be increasing from day to day. Its favorable properties and the fact it is virtually untraceable drug are probably the main two reasons. This article will focus on how to prepare HGH injections and how to inject properly, which is necessary for successful administration
About HGH
HGH is the hormone in charge of control to many functions, as well as benefits associated with youth, such as vitality, smooth skin, energy and resilience. HGH is naturally produced in the pituitary gland of the brain. It is also gaining popularity among athletes and bodybuilders due to numerous benefits associated with its use: decreased fat, increased muscle mass, high energy and even increased sex drive. It stimulates growth in most body tissues by increasing the number of cells rather than their size including skeletal muscle tissue, and with the exception of eyes and brain all other body organs. Growth hormone also stimulates triglyceride hydrolysis in adipose tissue, usually producing notable fat loss during treatment. HGH increases glucose output in the liver, and induces insulin resistance by blocking the activity of this hormone in target cells. This effect is seen where fats become a more primary source of fuel, further enhancing body fat loss. Human Growth Hormone is also a "piss-test" safe drug, since there is currently no reliable method for detecting the drug during a standard urinalysis.
HGH can be found under several commercial names as HGH, Saizen, Somatohorm, Nutropin, Genotropin, Humatrope, HGH Somatripin, Somatropin EuroHormones, Sytropin, Jintropin and many more.
HGH Injecting Technique
Self-injecting HGH may seem complicated, especially when doing it for the first time. The second and each time after that will be much easier. Luckily HGH is being injected under the skin (subcutaneously), which makes the whole process less complicated, because needle doesn’t penetrate as much as with other injection types, i.e. when injecting directly into a vein or muscle (intravenous or intra muscular injections).
What Do You Need
Needle and SyringeTo inject HGH to types of needles are needed; the short and the longer one to prepare the HGH-Sodium Chloride mixture and the shorter one to inject. Generally, a 25- to 27-gauge, 5/8-inch-long needle is an appropriate one. It is very important you use new needles only, taken directly from the plastic cap before using.
Syringe Barrel is a plastic tube that holds the liquid to be injected. Just like a ruler, it has lines to tell you how much liquid is inside. The tip of the barrel should have a plastic protector to maintain sterility. To inject HGH we only need one syringe, which will be used twice: to add sterile water to HGH vial and to give yourself an injection afterwards.
HGH and Sterile WaterHuman Growth Hormone ampoule and Sodium Chloride Injection Water (also referred as sterile water) to dissolve HGH are the crucial ones. Different types and brands are available, however Anabolic247.com experts suggest Somatropin from EuroHormones Pharmaceuticals in Macedonia.
Other AccessoriesAlcohol Swabs are used to clean the injection spot, as well as to clean the vial tops before starting the mixing procedure. Adhesive Bandage and gauze pad are optional to cover the injection spot at the end. These are available prepackaged at any pharmacy and most grocery stores.
You may also need Disposable Rubber Gloves if anyone else is giving the injection but yourself (i.e. a friend). It is vital he uses gloves to maintain sterility throughout the injecting process.
An appropriate placeA good, clean and peaceful place with sufficient lights and a flat work surface is highly recommended. You need to be concentrated throughout the process; therefore no one should disturb you. Now that you have organized your supplies, select a good work surface.
And before you start: make sure the work area is clean and to wash your hands.
Prepare an Injection
The best time to inject according to Anabolic247.com experts is right before going to bed. Typically more growth hormone is secreted at night than during the day.
Step 1Clean the surface (i.e. table) and organize everything you need.
Step 2Wash your hands with soap and warm water. If someone else is giving you the injection, he or she should put on a pair of disposable gloves now.
Step 3Remove the plastic flip tops from Human Growth Hormone ampoule and sterile water vials and throw them away. Clean rubber stoppers on both vials with a fresh alcohol swab and throw it away. Don’t touch the tops after being sterilized! (otherwise clean them again using a new alcohol swab)
Step 4Unwrap the syringe and a long needle (without touching a needle!) Take the plastic tip protector from the syringe, hold the syringe and twist tightly into place on the needle and then remove the plastic cap from the needle. Set it aside as you will need it later on. Pull back the plunger in the syringe until it reaches the 1 cc line on the barrel.
Step 5Place the vial of sterile water on the clean work surface. Take the syringe with a longer needle on and push it straight down through the middle of the rubber stopper on top of the vial. Push on the syringe plunger all the way down, which will push the 1cc of previously pumped air into the vial. This will create some pressure in it. While holding the plunger down, pick up the vial and the syringe with your other hand and turn it upside down. Slide the needle tip below the level of water in the vial.Then release the plunger, which will fills the syringe with water automatically. Alternatively pull back on the plunger until it reaches the 1cc mark on the syringe barrel. If air bubbles get in the syringe, tap the barrel with your fingertips, and then gently push the plunger in to move the air bubble(s) back into the vial.When the syringe is filled with sterile water remove the vial off the needle without touching the needle tip.
Step 6In the next step mix the sterile water with the Human Growth Hormone vial. To do this hold the needle and syringe containing sterile water and push the needle through rubber stopper on HGH vial and inject the Sterile Water into it. The needle tip should rest against the wall of the vial. Push the syringe plunger gently and slowly to allow the water to flow down the side of the vial.
Step 7Remove the needle from HGH vial and put the syringe aside. Shake the HGH vial mixed with Sterile water gently in slow round motion. Pull back the plunger to get some air into the syringe and insert it back into a HGH vial. Push the plunger to create pressure in the vial, which will help you pump the solution out. When a vial is empty, turn arround the syringe that needle is at the top.
Step 8Take the empty plastic cap from larger needle and remove it. Place a smaller needle needed to inject and make sure there are no air bubbles in the syringe.And you are ready to inject.
How to Inject
Choose the injection site for subcutaneous injection. Probably the most convenient, easiest and comfortable site is the anterior abdomen (belly). It is important to avoid the area directly around the belly button (umbilicus). When the spot is selected, clean it with a new, fresh alcohol sponge and allow the area to air dry.
Use your non-dominant hand (left hand for right handed people) pinch a fold of skin and hold it up. Use your dominant hand to pick up the syringe and dart it in to the skin fold quickly. Insert the entire needle perpendicular to the skin and keep it there. If you can pinch a 1-inch (2.5-cm) tissue fold, insert the needle at a 45-degree angle; for a 2-inch (5-cm) fold, insert it at a 90-degree angle. Make sure fluid is injected slowly, followed by quick needle removal. Additionally use a clean alcohol sponge to hold pressure on the injection site for a moment or two.
Don’t-s
When injecting Human Growth Hormone subcutaneously it is important not to aspirate after inserting the needle to prevent tissue damage, hematoma formation, and bruising. After the taking HGH don’t massage the site as it may cause damages to the underlying tissue and increase the medication absorption rate to an undesired (fast) rate.
Conclusion
Human Growth Hormone (i.e. Somatropin) can bring a lot of benefits, however when it is prepared and administered in the right way. The injection preparation may seem complicated, but will become a routine after repeating it several times. It is worth to be persistentArticle Search, as it brings excellent results on the long run.
ABOUT THE AUTHOR
John Freeman, a senior consultant at Anabolic247.com specialising in sport performance in fitness by workout, proper diet, anabolic steroids and supplements.
