GEORGE SPELLWIN'S ANNOUNCEMENTS
Enlightening Men about Anabolic Steroids and Bodybuilding for over Two Decades
 UBBFriend: Email This Page to Someone! |
 George Spellwin's ELITE FITNESS Discussion Boards
 Anabolic Discussion Board
 what size gauge needle for winny?
|
| Author | Topic: what size gauge needle for winny? |
|
bowedup4life Pro Bodybuilder (Total posts: 118) |
posted July 07, 2000 01:41 AM
  
what gauge do i need for winny? ------------------ IP: Logged |
|
SSMAN Pro Bodybuilder (Total posts: 790) |
posted July 07, 2000 02:25 AM
Check out the thread Macro created a couple of months ago titled "pins and you". There is some great info there! As for your winny question, I've heard of people using as small as 30g. It takes a little effort to push it, but it will work. IP: Logged |
|
Harleyguy Pro Bodybuilder (Total posts: 153) |
posted July 07, 2000 02:29 AM
I just finished a cycle which had winny in it.I used a 23 gauge 1 inch with no problems at all.Just remember it's not oil,you don't have to push hard,go slow. IP: Logged |
|
flexed1 Pro Bodybuilder (Total posts: 666) |
posted July 07, 2000 03:09 AM
illium i use 1" 23 gauge but have also used insulin needle as its micr refined and very smooth. also i inject it and if not in the mood swallow it. no taste IP: Logged |
|
tray renfro Pro Bodybuilder (Total posts: 642) |
posted July 07, 2000 04:11 AM
000 caps ------------------ IP: Logged |
|
Jeff_rys Pro Bodybuilder (Total posts: 380) |
posted July 07, 2000 04:26 AM
If micro refined, like Winstrol Zambon or the Aussie stuff, use a 29 or 30 gauge. I used a 27 gauge because I didn't had anything thinner, but you can fill the syringe with a 27 gauge, so 29 or 30 to shoot. Do yourself a favor, you will be pleased with those needles. The only problem (here in Belgium) the 30 gauge is only 1/2 inch, but for me just fine. You can shoot in the delts, tri's, bi's. I even use a 1/2 inch for the butt, just go a little higher. I myself will always use a 30 gauge if possible.
------------------ IP: Logged |
|
Tony72 Amateur Bodybuilder (Total posts: 73) |
posted July 07, 2000 08:47 AM
Jeff_rys does the winny go through the pins easy? Tony IP: Logged |
|
DRRman Pro Bodybuilder (Total posts: 268) |
posted July 07, 2000 08:49 AM
i use a 25g 5\8" dart and put it in the side delt, no pain at all, and my gear isn't micro refined either, but 90% of the time i get it in with no problem IP: Logged |
|
Jeff_rys Pro Bodybuilder (Total posts: 380) |
posted July 07, 2000 09:27 AM
You should use force. It makes a difference whether you use a 2 cc syringe or or 5 cc. I find it very hard to inject waterbased stuff with a 5 cc and a 30 gauge. Where I live you can get 25, 26, 27, but no 28, 29. I used to poor the Winny in the syringe. You know, you hold the open amp close to the syringe after removing the plunger. Then shook the stuff in the syringe. Always there was a loss (not much) of the Winny through the pin. So definitly a 29/30 with a 2 cc syringe. Jeff ------------------ IP: Logged |
|
lomaximo Amateur Bodybuilder (Total posts: 62) |
posted July 07, 2000 09:04 PM
I have read numerous articles by Bill Roberts (and I know guys that do it) suggesting to use an 1" X 1cc insulin needle. This makes injects almost painless, picking a different bodypart every other day. Example, right, left calves, right, left biceps. Later, Lomaximo IP: Logged |
All times are ET (US) | |
 |
|
|