Very serious thread ned help

[jeebise23]

hey guys sorry for the sloppy post i was pissed and was just writing while being pissed offanyway i started over and i hope this explains it behey guys this post has been revised, i am having problems with my whatman 45u getting clogged after my 2nd 10ml try. this is how i started and finished.first i put 50 grams of test-e powder in a beeker then i put 2%=4ml of ba in, then 18%=36 ml of bb. I added this to the powder to disolve it. I also had the beeker inside a pan with water in it and the temp. on low, and stirred it until everything was dissolve. Once that was complete i put cottonseed oil to the mixture i left the sove on low and kept stirring until i felt that it was enough. Now alot of you guys say that it should already look clear and yellow, well mine was a milky color until i fitered a little.Next i used a 10ml syringe with an 18 g needle to draw out 10ml of the solution. Oce i did thast i took the needle off and put a whatman 45u filter and attached the needle back on. Then i proceeded to filter the product by pushing on the syringe into a 100ml sterile and sealed vial once i got the first 10ml in there i took the filter off and attached just the needle on to it to draw another 10ml out of the solution. then once that was done i took the needle off attached the filter back on and put needle back on. Then again i proceeded to filter the contents by pushing on the syringe into the 100ml vial once i got halfway thru that period it started to get very difficult to push and liquid thru and again i just stopped coming out. Like i said before it sems to me that the powder that i received is either garbage or they might have added a cutting agent to it to increase the weight,as i know i have done the steps correctley. This is my guess now i hope you pros out there can give me an idea of what you think is going on and how to fix it i would be greatly appreciated. I was thinking about running through a cofee filter and se if that loosens it up thank john sorry for flaming you jdjack i was just pissed off for this simple thing to be over with as i have alot of money tyed up in this project of mine.

--------------------------------------------------------------------------------
Last edited by jeebise23; Today at 05:11 PM.. Reason: spelling tter

 

[PuffDawg]

You have to dissolve your powder with the BA and BB before ever adding the oil. And it should come out clear before ever adding the oil. You might have some bunk powder too. Idk... I had a hard time following this with all the misspelled words and run-on sentences. I had to read it 3 times. Your numbers are right though for the powder and BA/BB

 

[jeebise23]

sorry for the spelling, i am sorry but i did put the powder in first then i put the ba, and bb in there then heated it up dissolve the powder that is when i put the oil in afteri dissolved the powder, do u think i should try runnibg it thru a coffee filter and see if that helps because i know somw supplyers add (cut) to there powders to add weight it seems after the first 10ml the filter gets clogged going thr the 2nd 10ml this is the second time , the 20 mg that i have filtered is yellow and clear so i think my problem is in the filtration dept, once again if someone can give me there input even if its fitering it as should i use a cotton shirt first then a cofee filter, then try the whatms any advice would b appreciated thanks john

 

[PuffDawg]

Hmmm... ya thats got me baffled. I'm guessing you got some bad powder. If its cloudy after just heating it with BA and BB then i'd almost have to think its the powder. It should be clear. Maybe try a small batch again with the same powder and some different BA and BB and see if the same thing happens?? I just think filtering it all like you said is just gonna mess up your potency of the gear. Might be messed up anyway if they cut it with something else. Sorry bro but I'm out of ideas.... Maybe someone else has had some experience with this.

 

[goin on 4T]

There should be no cloudyness or milkyness to Test E, especially when its warm! Toss it and don't buy powder from them again. You don't know what the heck is in there and it really isn't worth knowing other than its no good. Sorry man, just toss it!

 

[jeebise23]

you guys r all wromg i found out today because i was going to do the other half 50g of my solution and i found out my batteries were low in my scale and it was not reading correctley so when i thought i was doing half of 100g i was only doing 20 g, and used enough ba and bb for 50grams, it looked like it did not dissolve properly as i did the next batch i had 80 grams left so i put enough ba, and bb and let it dissolve and it did dissolve correcteley then i added the oil and heated everything up and put i thr the filter and it all worked out thanks guys